Respective categories: MP Hot Forging Press

No.: MP-630

[View larger Picture]

By introducing of the world's advanced technology, our company developed MP Series Hot Forging Press. MP Series Hot Forging Press is widely used in areas of : automobile, tractors, internal combustion machinery,ship, aviation, mineral machinery, petroleum machinery, hardwares and tools.also used in the forging and precise trimming of bulk ferrous and non-ferrous metals.
This series machine has following advantages:

• 1.high precision
• 2.high utilization of material
• 3.high efficiency
• 4.automatic operation
• 5.low noise and light vibration

 

main technical parameters		Unit	MP-630	MP-1000	MP-1600	MP-2000	MP-2500	MP-3150	MP-4000	MP-5000	MP-6300
Nominal force		MN	6.30	10	16	20	25	31.5	40	50	63
Ram stroke		mm	220	250	280	300	320	340	360	400	450
Times of stroke		min-1	110	100	90	85	80	60	55	45	50
Maximum shut height		mm	630	700	875	950	1000	1050	1110	1468	1615
Height adjustment		mm	11	14	18	20	22.5	25	28	32	35
Dimention of	Left/right	mm	690	850	1050	1210	1300	1400	1500	1570	1840
working table	Front/back	mm	920	1120	1400	1530	1700	1860	2050	2250	2350
Dimention of	Left/right	mm	670	820	1030	1180	1260	1360	1460	1550	1820
ram	Front/back	mm	965	936	1140	1260	1380	1540	1710	1875	1925
Upper ejector	Type		机械	mechanical	机械	mechanical	机械	mechanical	机械/液压	mechanical	机械
	force	KN	32	50	80	100	125	160	200	250	300
	Stroke	mm	24	30	37	40	44	48	52	60	60
Lower ejector	Type		机械	mechanical	机械	mechanical	机械	机械	液压	hydraulic	液压
	force	KN	95	150	240	300	375	475	600	650	700
	Stroke	mm	24	30	37	40	44	48	50/200	0～150	0～150
	Power	KW	55	75	95	132	160	190	250	320	355
Main motor	Rotate speed	rpm	1000	1000	1000	1000	1000	1500	1500	1500	1000
	Voltage	V	380	380	380	380	380	380	380	380	380
Overall	Length	mm	3425	3500	3820	4469	4500	4100	4550	5000	5650
dimention	Width	mm	2825	4800	5080	5130	5250	5307	6350	6850	7525
	Height	mm	4715	6000	6571	7326	7850	8415	10000	10600	10800
Height above the ground		mm	3800	5300	6120	6471	6850	7340	7800	8400	8500